Installing Solar Panels Seems Complicated — So Much to Prepare, I’m Already Discouraged! Wait! Are you sure?

SMSolar is here to clear up your confusion about ‘Getting Solar Panels Installed. So, don’t think installing solar panels is too complicated just yet, check this out!

​

By following each step in the installation process, the system will work more efficiently to meet the energy needs of your building. Additionally, this approach helps reduce electricity costs and provides positive environmental benefits by lowering carbon emissions.

​

Installing Solar Power Systems (PLTS) in your building is a crucial step in adopting renewable energy. This process involves several key stages that must be carefully considered to ensure optimal system performance. These stages include initial preparation, installation, which involves the setup of solar panels and inverters, and post-installation steps for monitoring and maintaining the system. By following this guide, your building can maximize the efficiency and sustainability of using solar power.

​

​

​

​

​

​

​​​​​

​

​

​

​

​

​

​

​

​​​

​

 

 

 

 

 

 

 

 

​

Solar Panel System​

 

​Before Installation

This stage involves analyzing energy needs to determine the appropriate PLTS capacity, conducting a site feasibility study to ensure maximum efficiency, obtaining permits from relevant authorities, and designing the layout of solar panels, inverters, and other electrical systems. Before starting the installation, make sure a feasibility study has been conducted to determine the optimal location and installed capacity. This is also important to obtain the necessary permits from the Ministry of Energy and Mineral Resources (ESDM) and PLN. Throughout this entire process, SMSolar will be ready to assist and support you.

​

1. Collecting Your Building Data

Determine the existing electrical capacity of your building, calculate the average monthly electricity usage, and record the location coordinates for solar energy potential analysis.

​

2. We Will Survey the Building

Check the availability of space on the roof for solar panel installation, ensuring there are no other utilities such as outdoor AC units obstructing the panels. Evaluate the strength of the roof and building structure to ensure it can support the solar panels.

​

3. Know the Capacity Requirements of Solar Power Plants

Determine the appropriate solar capacity for your energy needs and calculate the potential savings on electricity costs to ensure an efficient investment.

​

4. Designing Your Solar Power System

Here, we will choose the most suitable roof location for solar panels based on the survey and create a detailed installation design while ensuring the building’s structure can support the PLTS.

​

5. Choose Your PLTS Financing Options

• Solar Purchase: Purchase the solar system and receive monthly cost savings on the electricity bill. Fastest payback. The system is fully owned by the buyer. No monthly payment.

• Solar Loan: Small upfront cost and purchase the system through a loan. The system is owned after the loan is paid off. Monthly payments based on agreed upon interest rate. Down payment (DP) ranges from 0% to 30%.

• Solar Rental: No upfront cost and rent the system throughout the term. No ownership, just renting the system. Down payment (DP) ranges from 0% to 30%.

​

6. Understand PLTS Permits

Ensure you follow most updated permit for PLTS installations. At the moment it is PERMEN ESDM 02 2024. The government aims to boost the use of renewable energy, including solar power, through clear guidelines on permits, quality standards, and installation safety. Additionally, these regulations offer incentives and subsidies to support the development and adoption of solar power systems.

​

Installation

Installing a Solar Power System (PLTS) in your building isn’t just about placing panels on the roof. It’s a journey that combines advanced technology, technical expertise, and a commitment to sustainability. Let’s explore how this installation process is carried out with high efficiency and maximum results.

​

1. Through Site Preparation

Before installing solar panels, it’s essential to ensure the site is fully prepared. This starts with cleaning the roof and checking the structural strength to ensure it can support the PLTS system. The support frame is then installed at an optimal angle so that the solar panels receive as much sunlight as possible, ensuring maximum energy efficiency.

 

2. Smart Choices: Quality Components for Long-Term Success

The choice of components greatly affects the performance of your PLTS. By selecting high-quality solar panels, inverters, support frames, and batteries, you ensure that your system will operate with maximum efficiency and have a long lifespan. Investing in the best technology means you get optimal results in electricity production and cost savings.

​

3. Connecting the Technology: From Panels to Inverter

Once the solar panels are securely installed, it’s time to connect them to the inverter. The inverter is what converts solar energy from direct current (DC) to alternating current (AC), the type of current used to power your home’s electronic devices. Each cable and connection between the panels, inverter, and the building’s electrical system is installed with high precision to ensure safety and optimal performance.

​

4. Testing: Ensuring Everything Works Perfectly

Before your PLTS system is declared ready for use, thorough testing is conducted. This is to ensure that all components are working well and that the system is ready to deliver clean, cost-effective electricity to your building.

 

5. Experienced Project Team: The Key to Installation Success

Installing a PLTS is not a task to be taken lightly. Choosing an experienced project team will make a big difference. With deep technical knowledge and an understanding of regulations, a well-trained team will ensure the installation process runs smoothly and error-free. Don’t worry about that, SMSolar is ready to tackle challenges and resolve them quickly, ensuring your system operates to the set standards.

 

6. Timing Is Everything: Fast and Efficient Installation

Time is money, and this also applies to PLTS installation. With a structured and realistic schedule, the project team can complete the installation quickly, reducing downtime, and activating your PLTS system immediately. This means you can start enjoying the benefits of solar energy without delay.

​

7. Commitment to Safety: Protecting Your Investment and Your People

Safety is non-negotiable. A company with Occupational Health and Safety (HSE/K3) certification will ensure that every step of the installation process is carried out with the utmost attention to worker safety and operational sustainability. By adhering to correct standards, the risk of work accidents is minimized, giving you peace of mind that your PLTS system is installed safely and responsibly.

​

After Installation

Congratulations, your Solar Power System is now installed! But the journey doesn’t stop here. The next step is all about making sure everything runs smoothly and efficiently for years to come. Here’s how to keep your system performing at its best.

​

1. Through Testing and Regular Monitoring

Once the installation is complete, it’s time to run some tests to ensure everything is functioning as it should. Regularly monitoring the system’s performance will help you catch any issues early and keep energy production at its peak.

 

2. Final Inspection and Certification

A licensed technician will conduct a final inspection to make sure your system meets all the necessary standards. After that, you’ll receive certification from the relevant authorities. This step is crucial to ensure your solar power system is officially recognized and ready to serve you.

 

3. Routine Maintenance: Keep It Clean, Keep It Green

To keep your system in top shape, routine maintenance is key. This includes cleaning the solar panels to remove dust and soiling, and checking all the components to ensure everything is in perfect working order. Clean panels mean more sunlight absorption, which translates to more energy for you!

​

4. Maximizing Your Savings: Let the Sun Pay Your Bills

With your new solar power system in place, you’ll start seeing significant reductions in your monthly electricity bills. By harnessing the power of the sun, you’re less dependent on the grid, which means more money in your pocket and less spent on traditional energy sources.

 

5. Leading with Sustainability: Embrace the Future of Energy

Thank you! By going solar, your aren’t just saving money — it’s leading the way in sustainability. Embracing renewable energy shows your commitment to the environment and positions your business as a forward-thinking, responsible leader in today’s market. Plus, it’s a great way to meet ESG (Environmental, Social, and Governance) goals and make a positive impact on the planet.

​

With each step taken, from Before Installation to After Installation, you move closer to a cleaner and more cost-effective future with solar power. So, are you ready to take the first step toward solar energy?​​​​​​​​​​​​​​​​​

​

​With each step taken, from Before Installation to After Installation, you move closer to a cleaner and ore cost-effective future with solar power. So, are you ready to take the first step toward solar energy?​​​​​​​​​​​​

​​​